120
Shooting Functions
4
Interval Shooting
During interval shooting, pictures are taken at a set interval from a set time.
1
Select [Interval Shooting] in the [A Rec. Mode] menu.
2
Press the four-way controller (5).
3
Use the four-way controller (45)
to select O (On).
4
Use the four-way controller (3) to select [Interval].
When taking two or more pictures, set the wait time until the next picture is taken.
Use the four-way controller (
45
) to select the number of hours, minutes,
and seconds, and press the four-way controller (
23
) to set the time.
You can set up to 24 hours, 0 minutes, and 0 seconds.
5
Use the four-way controller (
3
) to select [Number of Shots].
Set the number of shots to be taken.
Press the four-way controller (5) and use the four-way controller (23)
to select the number of shots to be taken.
You can select between 1 and 99 shots.
6
Use the four-way controller (3) to select [Start Trigger].
Set the time when the first picture is taken.
Press the four-way controller (5) and use the four-way controller (45)
to select [Now] or [Set Time].
Now Shooting starts immediately.
Set Time
Shooting starts at the set time. Use the four-way controller
(3) to select [Start Time], use the four-way controller
(45) to select the time, and press the four-way controller
(23) to set the start time.
Interval Shooting
Interval
Number of Shots
Start Trigger Now
1
img
Start Time
MENU
00 : ’ "00 01
OK
OK
Cancel
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
Need help?
General
