103
Shooting Functions
4
You can take multiple frames while creating a single picture.
1
Select [Multi-exposure] in the [A
Rec. Mode] menu and press the
four-way controller (5).
The Multi-exposure screen appears.
2
Use the four-way controller (
5
) to select the number of shots.
Use the four-way controller (23) to select from 2 to 9 shots.
3
Press the 4 button.
4
Use the four-way controller (3) to set Auto EV Adjust.
5
Use the four-way controller (5) to set Auto EV Adjust to O
(On) or P (Off).
When O (On) is set, the exposure is adjusted automatically according to
the number of shots.
6
Press the 4 button twice.
The camera returns to the Capture mode.
7
Take the picture.
The created picture is displayed in Instant Review each time the shutter
release button is pressed. Press the
i
button during Instant Review to
discard pictures created to that point and create again from the first picture.
The picture is saved when the set number of shots has been taken.
Shooting in Multi-exposure Mode
• If the | button or 3 button is pressed, or the Exposure Bracket is set
during Multi-exposure shooting, the pictures that have already been taken
are saved and Multi-exposure is exited.
•
Multi-exposure and Auto Bracket or Extended Bracket cannot be used together.
The mode set last is used.
Multi-exposure
Number of shots
Auto EV Adjust
MENU
Off
Downloaded From camera-usermanual.com Pentax Manuals
To Next Page
Loading...
Need help?
General
