Pentax K20D User Manual

39
Getting Started
2
We recommend using the AC adapter D-AC50 (optional) when using the
monitor for a long time or when connecting to your PC.
1 Make sure the camera is turned off and open the terminal
cover.
2 Face the S mark on the DC terminal of the AC adapter
towards the S mark on the camera, and connect the DC
terminal to the DC input terminal of the camera.
3 Connect the AC plug cord to the AC adapter.
4 Plug the AC cord into the power outlet.
Using the AC Adapter (Optional)
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the camera, AC adapter, AC
plug cord terminal and the power outlet. SD Memory Card and data will be
corrupted if disconnected while camera is recording or reading data.
• Be sure to read the AC adapter D-AC50 operating manual when using the
AC adapter.
• The battery in your camera will not charge when connected to the AC
adapter.
1 2
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)