Pentax K20D Quick Guide

5
Names of Working Parts
Check the names of the working parts on the camera used for
basic recording and playing back operations.
In this page, only the names of the working parts that appear in this Quick Guide
are introduced. For further explanation about the names and functions of the
working parts, refer to the Operating Manual (p.17 - 21).
Tripod socket
Battery cover
Main switch
K button
Lens unlock button
Card cover
Battery cover
unlock lever
Strap lug
Mode dial
Lens mount index
(red dot)
Card access lamp
Built-in Flash
LCD panel
Viewfinder
Monitor
Card cover
unlock lever
Diopter adjustment
lever
Shutter release button
Front e-dial
Focus mode lever
4 button
Shake Reduction
switch
Four-way controller
3 button
i button
M button
Q button

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)