13
WINDOWS
1 Double-click the [Safely
Remove Hardware] icon in the
task bar recognized area.
2 Click [PENTAX USB DISK
Device] and click [Stop].
3 Click [PENTAX USB DISK
Device Drive] and click [OK].
4 When a message is displayed
permitting removal, turn the
camera off and disconnect the
USB cable from your camera
and PC.
There is no hot plug icon in Windows 98/98 SE. To disconnect the
camera, simply turn off the camera and disconnect the USB cable.
Windows XP
Windows 98/98 SE
To Next Page
Loading...
