12
WINDOWS
1 Double-click the [Unplug or
eject hardware icon] in the
task bar recognized area.
The [Remove Hardware] screen will
appear.
2 Confirm that [Pentax USB
Disk Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
3 Confirm that [Pentax USB
Disk Device] is selected and
click [OK].
A message will appear.
4 Click [OK].
5 Turn off the camera and
disconnect the USB cable
from your camera and your PC.
Disconnecting your Camera from your PC
Windows 2000/Me
To Next Page
Loading...
