6
WINDOWS
6 With the camera turned off, connect the camera to the
PC using the USB cable.
Confirm that the CF card is inserted in the camera.
7 Turn on the camera.
The desktop screen will display [Found new hardware] (Windows XP)
or [New Hardware Found] (Windows 98/98SE/2000), and the USB
driver will be installed.
8 Double-click [My Computer] on the Desktop screen.
When the installation is complete, the camera is recognized as a
[Removable disk]. Open [My Computer] and confirm that [Removable
Disk] is displayed.
In Windows XP, if the CF card has a volume label, the volume label
name will be displayed instead of [Removable disk]. A new CF card
unformatted on the camera may show the manufacturer name or model
number.
To Next Page
Loading...
