16
MACINTOSH
1 Turn on your Macintosh.
2 With the camera turned off, connect the camera to the
Macintosh using the USB cable.
Confirm that the CF card is inserted in the camera.
3 Turn on your camera.
The camera is recognized as an [untitled] on the
desktop. The folder name can be changed.
4 Click the [ACDSee™] on the hard drive.
5 Double-click the [ACDSee™] program icon.
6 Open the camera folder with ACDSee™.
The camera images are in the [My Computer] → [Removable Disk]
(or volume label name if the CF card has one) → [DCIM] →
[XXXPENTX] (XXX is a three-digit number) folder.
7 Select the image to view from the image list.
Double-click the image you selected. A full-size image is displayed.
Displaying and Copying Images Using
ACDSee™
To Next Page
Loading...
Need help?
General
