80
Settings
Setting the Alarm
z
Press the Menu button in Play mode.
The [Playback] menu will be displayed.
x Use the four-way controller ( ) to select [Alarm].
c Press the four-way controller ( ).
The alarm list will be displayed.
v Use the four-way controller (
) to select 1-3.
b Press the four-way controller ( ).
The screen for setting the operating
mode and time will be displayed.
Four-way controller ( ) :
Selects the item
Four-way controller ( ) :
Changes the figures
n Press the DPOF button and select
the image to be displayed when
the alarm sounds.
The images on the CF card will be displayed. (If there are no
images on the CF card, no image will appear and no opera-
tion will be possible even if the DPOF button is pressed.)
Select an image with the four-way controller ( ) and
press the OK button.
m Press the OK button 3 times.
Setting is completed and the camera is turned off.
Turning the Alarm Off
When the camera is turned off and the set time is reached, the
alarm sounds for one minute.
When it finishes sounding, the power is automatically turned off.
You can turn the alarm off by pressing any button (except the
Zoom button).
The alarm does not sound when the camera is turned on.
MENU OK
1
Everyday
18:00
2 Once 00:00
3 Once 00:00
Exit Ok
Alarm
MENU OK
1
Everyday
18:00
Exit Ok
Alarm
Image
KB320(72-80)E.QE33 9/12/01 5:06 PM Page 80
To Next Page
Loading...
Need help?
General
