75
4
Taking Pictures
6 Press the 3 button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” below for adjusting the white balance
manually.
Have a blank sheet of white paper or similar material for White balance
adjustment ready beforehand.
1 In the White balance screen, use the four-way controller
(23) to select K (Manual).
2 Point the camera at the blank
sheet of white paper or similar
material for White balance
adjustment so that it fits the frame
at the center of the LCD monitor.
3 Press the shutter release button
fully.
The white balance is automatically adjusted.
4 Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5 Press the 3 button.
The camera returns to capture status.
Saving the White Balance 1p.85
Manual Setting
MENU
SHUTTER
White Balance
Cancel
Adjust
OK
OK
To Next Page
Loading...
Need help?
General
