Pentax Optio M20 - Letting the Camera Choose the Optimal Settings (Program Mode)

62
4
Taking Pictures
R
In R (Program mode), the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program).
3 Press the 4 button.
The shooting mode is selected and the camera returns to capture
status.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.79 - p.95) for details of how to set the
functions.
5 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6 Press the shutter release button fully.
The picture is taken.
Letting the Camera Choose the Optimal Settings
(Program Mode)
5, 6
1, 2
3
10/14/2006
1 0 /1 4 / 2 0 0 6
10/14/2006
38
3 8
38
14:25
1 4 :2 5
14:25