Pentax Optio S50 - Initial Settings; Setting the Display Language

23
1
Getting Started
Initial Settings
If the Initial Settings screen or Date Adjust screen appears when you turn
the camera on, follow the procedure below to set the display language
and/or current date and time.
If the Initial Settings screen appears
1p.23, 24 “Setting the Display Language”, “Setting the
Date and Time”
If the Date Adjust screen appears
1p.24 “Setting the Date and Time”
You can choose the language in which the menus, error messages, etc. are
displayed from the following: English, French, German, Spanish, Italian,
Russian, Korean, Chinese (traditional and simplified) and Japanese.
1 Turn the camera on.
2 Use the four-way controller (45)
to choose the display language.
The default setting is English.
3 Press the OK button.
The Date Adjust screen appears.
If neither screen appears, setting is not required.
Setting the Display Language
Power switch
Q Playback button
DISPLAY button
MENU button
Four-way controller
OK button
English
Initial Settings
MENU
OK
OK
O K
OK
Exit
E x i t
Exit
City
DST
NYC
e_kb376.book Page 23 Tuesday, August 10, 2004 1:46 PM