Pentax Optio S50 - Selecting the Image Quality

66
Taking Pictures
4
-
You can set the recorded pixels and quality together in Auto Select Mode. The
combination of recorded pixels and quality for each setting is shown below.
Image Quality
* The letter M on screen indicates megabytes (MB). 1 MB is 1 million pixels.
1 Set the mode dial to -.
2 Press the MENU button in Capture mode.
The [A Rec. Mode] menu appears.
3 Use the four-way controller (23)
to select [Image Quality].
4 Use the four-way controller (45)
to change the setting.
5 Press the OK button.
The camera is ready to take the picture.
Selecting the Image Quality
Setting Recorded Pixels Quality Volume* Use
Superior 2560×1920 C 5M
Higher quality
For lage prints or editing
images
For postcard size prints
For use on the Internet/e-mail
Super 2560×1920 D 5M
Normal 2048×1536 D 3M
Economy 640×480 D 0.3M
The Image Quality function is only available in - (Auto Select) mode. In
other modes, set the recorded pixels and quality level separately.
(1p.64, 65)
2
3, 4
Image Quality
Rec. Mode
Superior
MENU
OK
OK
O K
OK
Exit
E x i t
Exit
Recorded pixels:
2560x1920 (5M)
Quality level:
MENU
5
1
Image Quality
Rec. Mode
Superior
MENU
OK
OK
O K
OK
Exit
E x i t
Exit
Recorded pixels:
2560x1920 (5M)
Quality level:
e_kb376.book Page 66 Tuesday, August 10, 2004 1:46 PM