11
Prepare your camera for use before you begin using it.
Attaching the Carabiner Strap
Attach the carabiner strap
supplied with the camera
as shown in the illustration.
Installing the Battery and SD Memory Card
Install the battery and SD
Memory Card as shown in
the illustration.
* The SD Memory Cards are sold separately.
Battery/
card cover
Battery
lock lever
SD Memory Card
The inside of the battery/card and terminal covers are not waterproof
In locations where the camera is exposed to water or dirt such as
underwater, at the beach, in a kitchen, etc., make sure that the battery/
card and terminal cover lock levers are firmly locked so that they won't
open unexpectedly. Do not open the covers in such locations.
When removing the battery or card, avoid surroundings where the
camera may be exposed to water or dirt, and make sure the camera,
battery, card, and your hands are completely dry.
Preparing the Camera for Use
1
1
Battery/card
cover lock lever
SD Memory Card socket
Battery
To Next Page
Loading...
Need help?
General
