15
Aim the camera at the subject, then press the shutter release
button. The flash discharges automatically depending on the
brightness.
Frame the subject using the focus frame on the display.
Press the W / T button to change the captured area.
Press the shutter release button halfway
The focus frame on the display turns green if the subject is in
focus.
Press the shutter release button
fully.
The picture is taken.
WT
Widens the area
that is captured by
the camera
Enlarges
the subject
F4.6
F4.6
1/250
1/250
38
38
Taking Pictures
3
3