Pentax Optio WG-2 GPS - Turning the Camera on

12
Press the power switch.
The camera turns on and is ready to take still
pictures. Press the power switch again to turn
the camera off.
Make the Initial Settings.
The [Language/u] screen appears when the camera is turned on for the
first time. Select the desired language and then set the date and time.
Use the four-way controller (2345) to select the desired
language.
Press the 4 button. The [Initial Setting] screen appears.
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5), use
the four-way controller (2345) to
select the desired language, and then
press the 4 button. The [Initial Setting]
screen appears in the selected
language.
1
2
2
Memo
MENU
Cancel
Initial Setting
Hometown
New York
Settings complete
English
DST
OF
OFF
OFF
Turning the Camera On
2
2