145
6
Playback/Deleting/Editing
You can correct images where the flash has caused the subject to
appear with red eyes.
1 Enter the Playback mode and press the four-way
controller (45) to choose the image you want to
correct.
2 Press the four-way controller (3).
The Mode Palette appears.
3 Use the four-way controller
(2345) to select Z
(Red-eye Compensation).
4 Press the OK button.
A confirmation dialog for overwriting the
image appears.
If the “Cannot process correctly” error
message is displayed, go to step 5 in “Manual compensation for red-
eyes” (p.146).
5 Use the four-way controller (23) to select [Overwrite]
or [Save as].
When the image is protected, [Save as] will be selected automatically.
6 Press the OK button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Red-eye Compensation
Four-way controller
OK button
Red-eye Compensation
OKMENU
OK
Cancel
To Next Page
Loading...
