64
Taking Pictures
4
Camera shake and blurring are reduced because the camera
automatically increases the Sensitivity setting to allow for low light levels
when taking photos. The shutter speed and aperture are also set
automatically.
1 Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2 Use the four-way controller
(2345) to select (Blur
reduction mode).
3 Press the OK button.
4 Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5 Press the shutter release button fully.
The picture is taken.
Reducing Camera Shake and Blurring in Photos
(Blur reduction Mode)
• The Recorded Pixels are fixed at 4M and cannot be changed.
• When Sensitivity is set to auto, it may be set automatically at the
maximum ISO 1600 if necessary.
Shutter release button
Four-way controller
OK button
Blur reduction
OKMENU
OK
Cancel
To Next Page
Loading...
Need help?
General
