Pentax Optios7 - Default Settings

167
8
Appendix
Default Settings
The table below lists the factory default settings.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera
is turned off.
No : The setting returns to the default setting when the camera is
turned off.
∗ : The setting depends on the Memory setting (1p.102).
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (1p.165).
No : The setting is saved even after reset.
z [A Rec. Mode] Menu Items
Item Default Setting
Last
Memory
Setting
Reset
Setting
Page
Recorded Pixels 7M Yes Yes p.80
Quality Level D (Better) Yes Yes p.82
White Balance F (Auto) ∗ Yes p.84
AF Setting
Focusing Area J (Multiple) Yes Yes p.86
Focus Limiter On Yes Yes p.87
Aux. AF Light On Yes Yes p.88
AE Metering L (Multi-segment) ∗ Yes p.89
Sensitivity Auto ∗ Yes p.90
EV Compensation
±0.0
∗ Yes p.91
Movie
Recorded Pixels 640 (640x480) Yes Yes p.92
Quality Level C(S. Fine) Yes Yes p.93
Movie anti-shake
On
Yes Yes p.94
Digital Zoom On ∗ Yes p.74
Instant Review 0.5 sec Yes Yes p.95