88
Taking Pictures
4
The auxiliary AF light is convenient when you shoot a dark subject. The
function helps you to focus on the subject under the conditions in which
the autofocus does not work properly.
4 Use the four-way controller (23)
to select [Aux. AF Light].
5 Use the four-way controller (45)
to select O (On)/P (Off).
6 Press the shutter release button
halfway.
The camera is ready to take the picture.
Setting the Auxiliary AF Light
The auxiliary AF light of this camera conforms to the safety standard
(IEC60825-1) for Class 1 LED product. Looking at the light directly
will not create safety hazard. However, do not look into the emitter
from a very short distance since you may feel dazzled.
The camera does not emit the auxiliary AF light under the following
condition: the Capture mode is set to C (Movie) or q (Landscape),
or the focus mode is set to pan focus, infinity mode, or manual focus.
In the q (Landscape) mode, however, you can let the camera emit
the auxiliary AF light by setting [Aux. AF Light] to On.
AF Setting
Focusing Area
Focus Limiter
Aux. AF Light
MENU
To Next Page
Loading...
