Operator’s manual Pentruder RS2 wall saw and Pentpak 3 HFi power pack – Original instructions Page 9
General safety
WARNING - DANGER OF LIFE!
Cutting into an energized power line can make the wall saw and its accessories
conductive of high voltage and current which can result in serious or fatal injuries. A
circuit breaker cannot protect against this danger.
Failure to understand and comply with the safety instructions in this manual can
expose the operator and persons in proximity of the machine to extreme danger
and can result in serious or fatal injury.
• The machine may only be operated and serviced by authorised and trained
personnel. The personnel must be trained by personnel authorised by Tractive.
• To maintain the warranty and level of safety inherent in the design of this
machine, only Tractive original replacement parts may be fitted. Tractive AB
disclaims all responsibility for damage occurring as a result of using non-
original parts.
• Any kind of modifications or changes on the machine are not allowed.
• The machine may not be used in an environment where explosion protected
equipment is demanded.
• Safety and health regulations at the workplace must be followed along with
the safety instructions in this manual.
• Never use a diamond tool for materials it is not intended for.
• The user is responsible for and liable that the machine and diamond tools are
in faultless condition and all functions in perfect order before work is
commenced. Cracked saw blades must never be used.
•
Dry cutting without water cooling to the saw blade is prohibited.
Preparational safety
WARNING!
CAUTION WHILE TRANSPORTING AND LIFTING
Risk of crushing from falling objects.
• Use the lifting handles on the saw head or place it in the transport trolley for
safe handling. Make sure the machine modules are secured to the transport
trolley and that the transport trolley is placed on a stable, flat surface. If placed
on a slope or uneven surface, instability may occur and it can fall or roll away.
• Always lift the machine ergonomically correct and in a safe way.
• Avoid lifting and carrying heavy objects alone and use appropriate lifting
equipment when necessary.
• If the machine needs to be lifted with a crane, this can only be done after
permission and instructions have been given by a person responsible for safety
on the site.
• For lifting and transportation of the machine in the transport trolley, see 3.2.
BEFORE MOUNTING AND USING
Fatal injury may be caused by sudden machine start-up. Risk of electric shock from
live cables and connectors. Uncontrolled movements of the saw may result in injury
or death.
• Before any kind of service or mounting of, or on the machine is commenced,
the Pentpak 3 power pack must always be disconnected from the electric
power supply.
To Next Page
Loading...