Operator’s manual Pentruder RS2 wall saw and Pentpak 3 HFi power pack – Original instructions Page 8
Safety instructions
Intended use
See safety icon description on page 2. This wall saw must not be used unless all persons operating, or in any way
working on the machine has full knowledge and understanding of the whole Operator’s manual and all its safety
instructions. They must also have had training in its operation by an authorized distributor of Tractive AB’s products.
The operator must accept and take full responsibility for the correct operation of the machine. It is the obligation,
and responsibility of the employer/purchaser of the machine that the operator has received the information needed
to operate and take care of the machine in a safe and correct way.
Good working practice should always be used along with common sense. Tractive cannot foresee every possible
situation and this manual is not a substitute for the required professional skills and experience.
All other use than mentioned in this manual is non-intended and therefore forbidden.
• A Pentruder HFi wall saw must be used together with a Pentpak HFi power pack and cannot and may not be
used with any other type of power pack.
• The Pentpak HFi power pack may only be used to power Pentruder HFi machines.
• The track feet must be mounted on a completely rigid, and stable structure, not on any type of moving or
mobile device.
• Always use diamond blades well suited for the power output of the machine. Always follow the diamond
blade manufacturer’s recommendations. For maximum saw blade specifications, see 7 Technical Data.
The Pentruder HFi wall saw may only be used for cutting of:
• Concrete
• Stone material
• Masonry
Tractive AB disclaims all responsibility for damages to persons and / or property resulting from use of the machine,
whether they are caused by faulty handling or from damages occurring as a consequence of negligent or faulty
maintenance, or as a consequence of failure to check and control the machine with regard to damages and / or
faults. The described injuries in the warnings are not conclusive but should be considered as examples of what may
happen when safety instructions are not followed. Failure to comply may also result in other types of injuries.
WARNING!
Do not use the machine for cutting other materials than listed above. Do not
attempt to fix the machine on fragile or loose materials of any kind. The safe
fastening of the track feet can only be performed on materials with integrity and
strength high enough to securely and positively hold the fastening anchors in place
under load, all the way up to their specified load limit. Se anchor manufacturers
specifications.
!
Important!
Tractive’s responsibility for the product is only accepted when the Pentruder saw
head is used according to instructions, together with power packs and accessories
described in this Operator’s manual. If the machine is used with non-original
replacement parts or any other non-Tractive equipment, Tractive’s CE-marking will
automatically be rendered void and any warranty will also be void.
To Next Page
Loading...