When this box is checked, the device will be allowed to take actions according to received
commands via SMS.
Make sure your mobile plan supports SMS, and note that some plans may incur additional
charges for this.
SMS Control can reboot devices and configure cellular settings over signalling channels, even if
the modem does not have a data connection.
For details of supported SMS command sets, please refer to our knowledge base.
Click the checkbox to enable the SMS Control.
This setting sets the password for authentication - maximum of 32 characters,
which cannot include semicolon (;).
Optionally, you can add phone number(s) to the whitelist. Only matching phone
numbers are allowed to issue SMS commands. Phone numbers must be in the
E.164 International Phone Numbers format.
23.9 InControl
InControl is a cloud-based service which allows you to manage all of your Peplink and Pepwave
devices with one unified system. With it, you can generate reports, gather statistics, and
To Next Page
Loading...
Need help?
General
