peplink ONE - Quality of Service (QoS)

USER MANUAL
Peplink Balance Series
http://www.peplink.com -26 / 227 - Copyright © Peplink
6.6 Peplink Balance 310
6.6.1 Front Panel Appearance
6.6.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows:
Power and Status Indicators
Power
OFF – Power off
Green
– Power on
Status
OFF
– Upgrading firmware
Red
– Booting up or busy
Blinking r
ed– Boot up error
Green
– Ready
LAN and WAN Ports
Green LED
ON – 10 / 100 / 1000 Mbps
Orange LED
Blinking
– Data is transferring
OFF
– No data is being transferred or port is not connected
Port Type
Auto MDI/MDI-X ports
USB Port
USB Ports
For connecting a
4G/3G USB modem
Reset Button
Power LED
Status LED
LAN Ports
WAN Ports
USB