peplink ONE User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com -41 / 227 - Copyright © Peplink
6.11.2 LCD Display Menu
> HA State: Master/Slave
>LAN IP
> VIP
> System Status
> System
> Firmware ver. (shows firmware version)
> Serial number (shows serial number)
> System time (shows current time)
> System up time (shows system uptime since last reboot)
> CPU load (shows current CPU loading, 0-100%)
> LAN
> Status (shows LAN port physical status)
> IP address (shows LAN IP address)
> Subnet mask (shows LAN subnet mask)
> Link status (shows Connected/Disconnected, IP address list)
> WAN1
> WAN2
> …
> WAN13
> VPN status (shows Connected/Disconnected)
>VPN Profile 1
>VPN Profile 2
>…
>VPN Profile n
> Link usage
> Throughput in (shows transfer rate in Kbps)
> WAN1
> WAN2
> …
> WAN13
> Throughput out (shows transfer rate in Kbps)
> WAN1
> WAN2
> …
> WAN13
> Data Transfer’d (shows volume transferred since last reboot in MB)
> WAN1
> WAN2
> …
> WAN13
> Maintenance
> Reboot > Reboot? (Yes/No) (to reboot the unit)
> Factory default > Factory default? (Yes/No) (to restore factory defaults)
> LAN config
> Port speed (shows port speed: Auto, 10baseT-FD, 10baseT-HD,
> LAN 100baseTx-FD, 100baseTx-HD,1000baseTx-FD)
> WAN1
> WAN2
> …
> WAN13

peplink ONE Specifications

General

Category	Network Router
WAN Ports	1
LAN Ports	1
Wi-Fi	Yes
SpeedFusion Technology	Yes
Power over Ethernet (PoE)	No
WAN Interface	1 x Gigabit Ethernet
LAN Interface	1 x Gigabit Ethernet
Power Input	12V DC