The device with integrated AP can operate under the Wi-Fi Operating Mode:
Note: This option is available only for HD2/HD4 and HD2/HD4 MBX .
In this mode, all Wi-Fi will operate as Wi-Fi WAN. Since all device Wi-Fi are
exhausted, no integrated Wi-Fi AP will be operated on this device.
In this mode, some Wi-Fi will operate as Wi-Fi WAN. Some other Wi-Fi WANs
will be forced offline and their Wi-Fi resources will be reserved for integrated
Wi-Fi AP operations.
in this mode, all Wi-Fi functions as integrated Wi-Fi AP. All Wi-Fi WANs will be
forced to go offline.
Web Administration Settings
Check the box to allow the Pepwave router to manage the web admin access
information of the AP.
These buttons specify the web access protocol used for accessing the web
admin of the AP. The two available options are HTTP and HTTPS .
This field specifies the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access
Protocol . With this enabled, any HTTP access to the web admin will redirect to
HTTPS automatically.
This field specifies the administrator username of the web admin. It is set as
admin by default.
This field allows you to specify a new administrator password. You may also
click the Generate button and let the system generate a random password
automatically.
To Next Page
Loading...
Need help?
General
