EasyManuals Logo

peplink Pepwave MAX Series User Manual

peplink Pepwave MAX Series
424 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #305 background imageLoading...
Page #305 background image
Scenario 2: SIM Injector in WAN of main Router and
multiple Cellular Routers
Setup topology
In this scenario, each HD Dome creates a WAN connection to the main router. A single SIM
Injector is used to provide SIM cards for each HD Dome. The HD Dome can be replaced with
any Peplink cellular router supporting RemoteSIM technology.
This scenario requires the completion of the configuration steps shown in Scenario 1 in
addition to the configuration steps explained below.
Additional configurations for Cellular Routers
Step 1. Disable the DHCP server.
- HD Dome 1 should act as a DHCP server.
- HD Dome 2 should be configured to have a static IP address with DHCP disabled.
- Both routers should be in the same subnet (e.g. 192.168.50.1 and 192.168.50.2).
https://www.peplink.com
305
Copyright @ 2021 Peplink

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the peplink Pepwave MAX Series and is the answer not in the manual?

peplink Pepwave MAX Series Specifications

General IconGeneral
Brandpeplink
ModelPepwave MAX Series
CategoryWireless Router
LanguageEnglish

Related product manuals