peplink Surf User Manual

PePLink Surf User’s Manual v2.6
Copyright © 1999-2006 PePLink Ltd. All Rights Reserved Page 9 of 30
Click the “Advanced Config” button to enter the parameters of the access
point to associate to. You should see this screen:
In the field “SSID” under Wireless Settings, input the access point’s SSID
(sometimes it is called “network name”). According to the setting of the
Access Point you are associating to, you may choose different
“Authentication setting”.
If “Static WEP key” or “WPA/WPA2-Personal” is selected, input the
Encryption Key field as well.
Click the “Save” button at the bottom to complete.
You can now click the “Connect” link on the top bar and then click the
“Connect” button to associate with the access point.
There are also options of “802.1x with dynamic WEP key” and
“WPA/WPA2-Enterprise”. For their details, please refer to chapter 4.4 .

peplink Surf Specifications

General

Brand	peplink
Model	Surf
Category	Wireless Router
Language	English