2015-06
8
PMI360DV-F130-IU2E2-V15
Product Description
4Product Description
4.1 Use and application
The inductive angular positioning system PMI360DV-F130-IU2E2-V15 is a measuring system
designed for the non-contact detection of the angular position of valve actuators and valves.
The system offers flexible, user-friendly parameterization functions and is suitable for the
universal detection and feedback of rotary movements around a fixed rotation point in all areas
of machine and plant construction.
The PMI360DV-F130-IU2E2-V15 has an analog output for the indication of angular positions.
For high resistance loads (>3.3 k), the angular position will output a voltage value 0 ... 10 V
DC and for low resistance loads (<400 ), a current value 4 ... 20 mA. In addition, the
PMI360DV-F130-IU2E2-V15 has two switching outputs that can be programmed independently
of one another and that can be used to mark two important positions (e.g., start and stop
position).
The actuator BT-F130-A (see chapter 4.4) is usually attached to the rotary system component
to detect the position. This actuator rotates in the central hole on the PMI360DV-F130-IU2E2-
V15, contains a metal insert required for position detection and is adapted perfectly to the
mechanical requirements of valves or valve actuators.
To Next Page
Loading...