Pepwave Peplink MAX Transit Duo (CAT-12) User Manual

If Use first two DNS servers as Health Check DNS Servers is checked, the first
two DNS servers will be the DNS lookup targets for checking
a connection's health.
If the box is not checked, Host 1 must be filled, while a value for Host 2 is optional.
If Include public DNS servers
is selected and no response is received from all
specified DNS servers, DNS lookups will also be issued to some pub
lic DNS
servers. A WAN connection will be treated as down only if there is also no response
received from the public DNS servers.
Connections will be considered as up if DNS responses are received from any one
of the health check DNS servers, regardless of
a positive or negative result. By
default, the first two DNS servers of the WAN connection are used as the health
check DNS servers.
Health Check Method: HTTP
HTTP connections will be issued to test connectivity with configurable URLs and strings to match.
URL1
WAN Settings>WAN Edit>Health Check Settings>URL1
The URL will be retrieved when performing an HTTP health check. When
String to
Match is left blank, a
health check will pass if the HTTP return code is between 200
and 299 (Note: HTTP redirection codes 301 or 302 are treated as failures). When
String to Match
is filled, a health check will pass if the HTTP return code is between
200 and 299 and if the HTTP response content contains the string.
URL 2
WAN Settings>WAN Edit>Health Check Settings>URL2
If URL2 is also provided, a health check will pass if either one of the tests passed.
Other Health Check Settings
Timeout
This setting specifies the timeout in seconds for ping/DNS lookup requests. The
default timeout is 5 seconds.
Health Check
Interval
This setting specifies the time interval in seconds between ping or DNS lookup
requests. The default health check interval is 5 seconds.
Health Check
Retries
This setting specifies the number of consecutive ping/DNS lookup timeouts after
which the Pepwave
router will treat the corresponding WAN connection as down.
Default health retries is set to 3. Using the default Health Retries setting of 3, the

Pepwave Peplink MAX Transit Duo (CAT-12) Specifications

General

Brand	Pepwave
Model	Peplink MAX Transit Duo (CAT-12)
Category	Network Router
Language	English