Pepwave Surf Series User Manual

PePWave Surf/Mesh Connector/CarFi Series User Manual
Page
18
In Manual Configuration mode, the SSID is manually entered.
Authentication can be one of three configurable values:
— Open
For Open Authentication Mode, no Encryption Key is necessary.
— Static WEP Key
For Static WEP Key Authentication Mode, a 64- or 128-bit Encryption Key is
required, and can be entered in either an ASCII or HEX representation.
Static WEP Key Authentication Configuration
— WPA/WPA2-Personal
For WPA/WPA2-Personal Authentication Mode, an Encryption Key, of at least 8
characters, is required.
WPA/WPA2-Personal Authentication Configuration
Broadcast SSID can be one of two configurable values:
— Enable
The configured SSID will be broadcast such that it can be detected by an SSID scan.
— Disable
The configured SSID will not be broadcast such that it cannot be detected by an
SSID scan. In order to connect with the access point, the SSID needs to be known
by the client.

Pepwave Surf Series Specifications

General

Brand	Pepwave
Model	Surf Series
Category	Wireless Access Point
Language	English