Pepwave Surf Series - Integrated Wi-Fi Access Point Configuration

PePWave Surf/Mesh Connector/CarFi Series User Manual
Page
15
4.5 Integrated Wi-Fi Access Point Configuration
(Applicable to Surf AP Indoor/Outdoor and CarFi Series)
Integrated Wi-Fi Access Point is configured via the CPE Setup tab. The following sections
will provide information as a guide through the configuration.
The available Access Point (AP) settings for the Integrated Wi-Fi Access Point functionality
are as follows:
— Disable
Integrated Home Wi-Fi Access Point functionality is disabled
— Configure Manually
Manual configuration of the SSID, Authentication, and Encryption Key values
corresponding to the Access Point.
— Configure Automatically
The SSID, Authentication, and Encryption Key values corresponding to the Access
Point are automatically configured to be the same as the respective values that
correspond to Citywide Wi-Fi.