EasyManua.ls Logo

PERFECTPRO DIGITUBE - Tone; Gbg B

PERFECTPRO DIGITUBE
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
6. Press the SELECT-INFObuttontoconrm.Thedayashes.
7. Press the TUNING or buttons to set the current day.
8. Press the SELECT-INFObuttontoconrm.Themonthashes.
9. Press the TUNING or buttons to set the current month.
10. Press the SELECT-INFObuttontoconrm.Theyearashes.
11. Press the TUNING or buttons to set the current year.
12. Press the SELECT-INFObuttontoconrm.“Synclockon”ashes.
13. Press the TUNING
or buttonstochooseeither“Synclockon”or“Synclockoff”.
14. Press the SELECT-INFObuttontoconrm.Settingnish.
RDS time synchronisation
“Synclock on” option during the time setting, the time will be automatically updated. Time synchronisation can take several minutes.
TheautomatictimesettingisalwaysactivatedwhentheradioisswitchedfromstandbytoFMbroadcastingandreceivesaRDS
station.
Press the SELECT-INFObuttontoconrm.
SETTING THE ALARM
Thealarmcanonlybesetwhentheradioisinstandbymode.Ifnobuttonsarepressedfor5seconds,theradiowillexitthealarm
setup and the setting is cancelled.
1. Press the MENU buttonforabout3seconds,andthenpresstheMENUbuttonagainuntilthedisplayshows“ALARMSET”.
2. Press the SELECT-INFObutton.Thehourdigitsashonthedisplay.
3. Press the TUNING or buttons to set the hour
4. Press the SELECT-INFO buttontoconrm.Theminutedigitsash.
5. Press the TUNING or buttons to set the minute.
6. Press the SELECT-INFObuttontoconrm.“ALARMSOURCE”displayed.
7. Press the TUNING or buttons to choose among “FM RADIO”, “BUZZER” and “DAB”.
8. If“FMRADIO”isselected,thelastlistenedstationwillbeplayedwhenthealarmrings.
9. “VOL XX” displayed. Press the TUNING or buttons to change the alarm volume.
10. Press the SELECT-INFObuttontoconrm.Settingnish.
19
Switching on/ off the alarm
1. To switch the alarm on, press the SELECT-INFObuttonandholdfor2seconds.Thealarmiconwillbeshownatthetopleft
corner.
2. Toswitchthealarmoff,presstheSELECT-INFObuttonagainandholdfor2seconds.Thealarmiconwillbedisappear.
3. Toturnoffthealarmwhenitbuzzes,simplypresstheOn/Off button.
VOLUME & SOUND
To adjust the volume, simply press the Volume–or+buttonswhenplayingtheDAB/FMradio/Bluetooth/AUXINmode.
Thelevelofvolume(from00to40theloudest)willbeshownontheLCDDisplay.
Note:Whenplayingonbatteries;iftheenergylevelofthebatteriesistoolow,soundwilldistortonhighervolume.
360 DEGREES SOUND
TheuniqueNeodymiumspeakerlocatedontopoftheradioprovidesa360degreessoundimage.
Suggestion:Ifpreferred,placetheradioinacornerorclosetoawallforadditionalsoundreection.
TONE
The TONEfunctionenablestheusertoadjustthelowerandhighersoundfrequencies.
1. Press the On/Off button to switch on the radio.
2. Press the TONE button, the display shows “BASS 0”
3. Press Volume–or+buttonstosetthedesireBasslevel.
4. PresstheSELECT-INFObuttontoconrm,then“TREBLE0”displayed.
5. PressVolume–or+buttonstosetthedesireTreblelevel.
6. PresstheSELECT-INFObuttontoconrm,anddisplayreturnedtonormal.
GB
GB

Related product manuals