PERFECTPRO DIGITUBE - Backlight; Warranty

2423
WARRANTY
This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or any modications or alterartions to the
radio have been made !
Thetermsofthewarrantyofthisradiodonotcoverthefollowing:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised repair.
- Normal wear and tear.
-Breakingorbendingoftheantenna.
-Batteries,beingconsumables,donotfallunderthewarrantyconditionsoftheradio.
SPECIFICATIONS
Power requirements
MainsAC/DCadaptor Input:110-240V50/60HzAC~,Output:12VDC 2A
Batteries 6x1,5V(TypeIECLR6/AM3/sizeAA)
Rechargeablebatteries 6x1,2V(TypeHR06/sizeAA/2500mAhNiMHrechargeablebattery)
BatteriesofPerfectProbrandarehighlyrecommended
Frequency coverage FM87.5–108MHz
DAB174,928–239,200MHz
Circuit features
Loudspeaker 1xØ21/4inch
Output power 1 x 5W
AuxInsocket Ø3.5mm
Bluetooth
Version4.0 SupportsBluetoothprolesA2DP,AVRCPandHFP
GB
GB
BACKLIGHT
LCD backlight
ThemenuoftheradiocanbeconguredtoLCDbacklight.
1. Press the On/Off button to turn on the radio.
2. Press the MENU button, and the Tuning or buttons until the display shows “System”.
3. Press the SELECT-INFO button and the then Tuning or buttons until the display shows “LCD backlight”.
4. Press the SELECT-INFO button to enter the LCD backlight adjustment menu.
5. Press the Tuning
or buttons to select “on” in order to keep backlight always lightened when the radio is turned on with
AC power supply;
6. Or Press the Tuning or buttonstoselect“off”(bydefault)sothatthebacklightwillbelightenedforabout10seconds
whenever a button was pressed with AC power supply.
7. Press the SELECT-INFO buttontoconrmyourchoice.TheLCDbacklightwillchangeuponthelatestselection.
Note:TheLCDbacklightoptions“on”wouldonlybefunctionalwhentheradiowaspoweredbyACpowersupply.Inthiscase,when
theradiowaspoweredbybatterypowersupply,theLCDbacklightwouldbeswitchedtooption“off”–10secondslightenedwhena
button was pressed. When the radio was connected to mains again with AC power supplied, the last user settings would be applied
again.