PERFECTPRO DIGITUBE - Language Setting; Software Version; System Reset; Key Lock

22
LANGUAGE SETTING
Themenuoftheradiocanbeconguredtovariouslanguages.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button, and then the TUNING
or buttons until the display shows “System”.
3. Press the SELECT-INFO button; then the TUNING
or buttons until the display shows “Language”.
4. Press the SELECT-INFO button; then the TUNING or buttonuntilthedesiredlanguageappearsonthedisplay(default
 isEnglish).
5. Press the SELECT-INFObuttontoconrmyourchoice.
6. The display menu will then change to the chosen language.
SOFTWARE VERSION
Thesoftwaredisplaycannotbealteredandisjustforyourreference.YoucanonlyviewthesoftwareversioninDABandFMmode.
1. Press the On/Off button to switch on the radio.
2. Press the SOURCE button to select FM or DAB mode.
3. Press the MENU button, and then TUNING or button until the display shows “System”.
4. Press the SELECT-INFO button; then the TUNING or button until the display shows “SW Version”.
5. Press the SELECT-INFObuttontoviewthesoftwareversion.
6. Press the MENU button to return to the normal radio display.
Note: USBsocketnexttothebatterycompartmentisforupgradingthesoftwareofthedeviceifneeded.
21
SYSTEM RESET
Iftheradiofailstooperatecorrectly,orsomedigitsonthedisplayaremissingorincomplete,carryoutthefollowingprocedure.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button, and then TUNING
or button until the display shows “System”.
3. Press the SELECT-INFO button; then the TUNING
or button until the display shows “Reset”.
4. Press the SELECT-INFO button; “Reset? <No> Yes” displayed.
5. Press the TUNING or buttontoselect“Yes”ifyouwishtoresettheradio,otherwise,select“No”.
6. Press the SELECT-INFObuttontoconrmyourchoice.
7. Afullresetwillbeperformed.Allpresetsandthestationlistwillbeerased.Allsettingswillbesettothedefaultvalues.Theradio
 willstartupandthedisplaywillshow“WELCOME”forafewseconds.Thentheradiowillautomaticallyperformanautoscanof
the Band III DAB channels and the FM band. The display will show “Scanning” in DAB and “Auto” in FM.
8. When the scan is completed, the 10 strongest FM stations will be stored as presets. The radio will switch to standby with the
updated clock and date showing on the display.
Incaseofmalfunctionduetoelectrostaticdischarge;resettheproductasabovetoresumenormaloperation.Ifyouarenotableto
performtheresetoperationasabove,removeandreconnectallbatteriesandthepowersupply.
KEY LOCK
TheradiosupportsKeyLockfunctioninalltheStandby,DAB,FM,BluetoothandAux-inmodes.
1. Pressed and hold SOURCE buttonforabout3seconds,theLCDwilldisplay“Locked”.
2. Whenkeysarelocked,thefunctionsoftheradiowillbetemporarydisableduntilithasbeenunlocked.Duringthismoment,the
 radiowouldonlybrightenthebacklightforafewsecondsandshowing“Locked”indisplay.
3. Pressed and hold the SOURCE buttonfor3secondsagain,theradiowoulddisplay“Unlocked”,andthekeylockfunctionwill
be disabled.
Noted:Whentheradioisinstandbyandpoweredbybatteries,someofthebuttonswerenotbeabletobrightentheradio’sbacklight
in order to save energy.
GB
GB