Performance Designs PD Series User Manual

MAN-0012 Rev. I Page | 30
PRO PACKING INSTRUCTIONS
If the rig manufacturer specifies a packing method other than the ones
shown, and the rig manufacturer authorizes its use for this specific
parachute, you may decide which instructions to follow. Otherwise you
must follow PD’s instructions. These reserves have been tested and found to
work well using both the PRO Pack method shown here, and the Flat Pack method
shown in the Appendix of this owner’s manual. It is recommended that you follow
the instructions for the packing method with which you are most familiar.
Inspect the canopy thoroughly before starting to pack it, following the
inspection instructions described in section 4 of the PD Reserve Owner’s
Manual. Check the line continuity, and ensure the canopy has been assembled on
the rig correctly.

Performance Designs PD Series Specifications

General

Brand	Performance Designs
Model	PD Series
Category	Accessories
Language	English