MAN-0012 Rev. I Page | 38
APPENDIX
FLAT PACKING INSTRUCTIONS
If the rig manufacturer specifies a packing method other than the one shown, and the
rig manufacturer specifically authorizes its use for this parachute you may decide which
instructions to follow. Otherwise you must follow these instructions. These reserves have
been tested and found to work well using both this method and a specific, neatly
organized, Pro Pack method for reserves.
Make reference to Section 5 regarding Deployment Systems and Compatibility
prior to packing the reserve.
Take note of the Repack cycle as discussed in Section 5.
To Next Page
Loading...