Performance Designs PD Series User Manual

MAN-0012 Rev. I Page | 43
12. Clear the stabilizers A to B,
B to C, and C to D so that they
are on each side of the line
path and do not cross the
center. Look up the lines to all
the line attachment points. All
lines should go up to the
attachment points with no
canopy fabric between them.
14. Grasp the tail at each edge
of the center cell and pull down
until even with the lower edge
of the folded canopy. Raise the
center cell of the tail 6 inches
and inspect the D lines and
steering lines. Make sure all
lines are taut
.
13. Pull up the slider by
grabbing the tapes around its
center and walking from the
connector links to the base of
the folded canopy.

Performance Designs PD Series Specifications

General

Brand	Performance Designs
Model	PD Series
Category	Accessories
Language	English