SB Brace Frame for single-sided walls
Instructions for Assembly and Use – Standard Configuration
Content
Overview
Main components 1
Key 2
Presentational reference 2
Introduction
Target groups 3
Additional technical documentation 3
Intended use 4
Instructions for use 4
Care and maintenance instructions 5
Safety Instructions
Cross-system 6
System-specific 7
Storage and transportation 7
General
A1 Storage and Transportation 8
A2 Tie Technology
Anchor System DW 10
Execution with Anchor Waler 12
Double Tie Yoke 13
Anchor installation 14
Standard Configuration SB-A0, A, B, C
B1 Pre-Assembly
Mounting the Brace Frame 16
B2 Connecting to the Systems
Girder formwork 18
Panel formwork 22
B3 Bracing
Diagonal bracing 26
B4 Moving
With the crane 28
With the Guide Roller 29
Standard Configuration SB-1, SB-2
C1 Connecting to the Systems
SB-1 up to h = 3.60 m 30
SB-2 up to h = 6.00 m 34
C2 Moving
With the crane 39
Standard Configuration SB-L
D1 Pre-Assembly
SB-L with Anchor Bracket 40
SB-L VARIOKIT 41
D2 Connecting to the Systems
Panel formwork 42
D3 Tie Technology
Anchor System DW 15 43
D4 Moving
With the crane 44
D5 Application Possibilities
Version 1, Version 2 45
Shuttering, Striking, Dismantling
E1 Shuttering
Procedure 46
E2 Striking
Procedure 47
E3 Dismantling
SB-A0, A, B, C 48
SB-1, SB-2 49
Application
F1 Internal Corners 50
F2 Use as Horizontal Heavy-Duty Bracket 51
Single suspension 52
Double suspension 54
Components
Components 56
To Next Page
Loading...
