Need help?Do you have a question about the PerkinElmer IVIS Lumina III Series and is the answer not in the manual?
General| Animal Capacity | Up to 5 mice or 2 rats |
|---|---|
| Spectral Unmixing | Yes |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Imaging Modalities | Bioluminescence, Fluorescence, Cerenkov |
| Camera Type | Cooled CCD |
| Wavelength Range | 400-900 nm |
| Software | Living Image software |
| Weight | Varies by configuration |
| Excitation Filters | Multiple filter positions, user-selectable |
| Emission Filters | Multiple filter positions, user-selectable |
Provides safety information in various formats, including cautions and warnings.
Explains the meaning of safety symbols found on the equipment and in the manual.
Emphasizes reading, retaining, and following all safety and operating instructions.
Covers X-ray safety, hazards, and relevant regulations for operation.
Warns against self-servicing and highlights potential voltages in the electronics tray.
Warns about intense light causing eye damage and heat from the lamp causing burns.
States the equipment produces X-rays and requires trained personnel for operation.
Defines the IVIS Lumina XRMS as a cabinet X-ray system with low user exposure.
Discusses ionization, cell damage, deterministic, and stochastic effects of radiation.
Details safety features like radiation shielding and control panel indicators.
Outlines user responsibilities for safe operation and regulatory compliance.
Provides step-by-step instructions for powering on and initializing the system.
Outlines the recommended steps for safely shutting down the imaging system.
Guides on acquiring fluorescent images using the IVIS Acquisition Control Panel.
Addresses hardware problems, fuse replacement, and lamp replacement for the module.
Recommends periodic X-ray leakage safety tests for the instrument.
Details daily, weekly, monthly, and annual safety checks for the system.
Outlines steps to take when no image is generated by the system.
To Next Page