Need help?Do you have a question about the PerkinElmer VICTOR Nivo and is the answer not in the manual?
General| Brand | PerkinElmer |
|---|---|
| Model | VICTOR Nivo |
| Category | Laboratory Equipment |
| Language | English |
Explains hazard warning symbols like Danger, Warning, Caution, and Notice.
Details correct usage and restrictions for the VICTOR Nivo system and its accessories.
Specifies operating, transportation, and storage conditions like temperature, humidity, and altitude.
Covers general safety guidelines and specific hazard warnings for operating the instrument.
Covers risks associated with electrical power supply, cords, and grounding.
Warns about hot components inside the reader and hot plates after use.
Details precautions for handling liquids, potential fire hazards, and biohazard considerations.
Warns about pinch points, pointed pins on the gripper, and risk of injury from stacker movement.
Discusses hazards associated with CO2 and N2 gases, installation, and ventilation.
Mentions the UV radiation source and safety precautions during maintenance.
Outlines requirements for handling biohazardous, corrosive, or toxic materials.
Explains laser classification, warnings, and safety features related to laser exposure.
Shows examples of instrument labels for the reader, dispenser, and stacker modules.
Provides a labeled diagram of the VICTOR Nivo instrument components.
Lists the six different measurement technologies offered by the VICTOR Nivo.
Lists the items included in the shipping box for the VICTOR Nivo.
Details the necessary hardware specifications for computer and control device.
Specifies requirements for the computer used to operate the reader.
Instructs on disabling sleep modes and managing power for the control device.
Lists supported operating systems and recommended web browsers for the user interface.
Advises on the ideal placement of the reader for optimal performance and safety.
Details how to connect power supply and communication cables to the reader.
Explains the procedure for powering the reader on and off using the power button.
Guides on configuring the computer and connecting it to the VICTOR Nivo reader.
Guides through connecting the reader to a PC using a direct Ethernet cable.
Details IP address configuration steps for the control PC.
Explains setting up IP address and subnet mask for the computer.
Describes how to connect to the VICTOR Nivo via its IP address.
Guides on connecting the reader to a PC via a Wi-Fi router.
Details connecting the control device to the Wi-Fi network and the reader.
Explains how to add the reader's IP address to trusted sites for better browser connectivity.
Provides step-by-step instructions for updating the VICTOR Nivo software.
Details the procedure for priming the dispenser pumps before use.
Explains how to wash the dispenser pumps and tubing after use.
Describes how to return remaining liquids to the reagent bottle.
Identifies the gas connectors on the back of the reader and their purpose.
Lists safety precautions related to CO2 and N2 gases and installation environment.
Details the equipment supplied for the gas control option and a connection diagram.
Describes the tubing and adapters used for connecting gas control components.
Identifies the connectors and ports on the rear of the gas controller.
Provides steps for connecting tubing from gas tanks to the gas controller.
Guides on connecting tubing from the gas controller to the VICTOR Nivo reader.
Explains how to adjust pressure gauges for CO2 and N2 tanks and the system.
Covers checking cables, tubing, and basic settings of the gas controller.
Instructs to verify all cable and tubing installations for the gas control system.
Details how to check and adjust basic PID control parameters for gas concentrations.
Guides on configuring gas controller settings, including concentrations and modes.
Guides on setting desired CO2 and O2 concentrations using the controller interface.
Explains how to switch between standard CO2/O2 control and CO2-only mode.
Provides a labeled diagram of the stacker module and its components.
Advises on the correct placement of the stacker module for operation.
Details how to connect power and communication cables for the stacker module.
Explains how to power on and off the entire system including the stacker.
Describes safety features like sensors, encoders, and the safety stop recovery procedure.
Explains how to control the stacker using the reader's software interface.
Details the buttons and status indicators on the stacker's control panel.
Describes the function of the Stop, Park, and Home buttons on the stacker.
Explains the meaning of the IN/OUT LEDs and the LED ring for stacker status.
Describes the IN and OUT magazines, their capacity, and how to install/remove them.
Provides instructions for loading and unloading plates into the stacker magazines.
Gives guidelines on how to safely move the stacker module with the reader.
Guides on how to change optical components like filters and mirror slides.
Step-by-step guide on how to load a new filter into the reader.
Provides notices and handling instructions for filters.
Step-by-step guide on how to unload a filter from the reader.
Provides notices and handling instructions for filters.
Guides on how to unload and replace a mirror slide in the reader.
Provides notices and handling instructions for mirror slides.
Introduces the process of installing new mirrors into a mirror slide.
Differentiates between mirror slide revisions and provides guidance.
Lists the components of the Mirror Slide Rev. D.
Details the steps for installing mirrors into a mirror slide.
Covers updating mirror labels and software configuration.
Explains how to remove dust from the reader and stacker module.
Details procedures for cleaning up spilled liquids on the reader or stacker.
Guides on how to clean optical components like filters and lenses.
Provides specific steps for removing fingerprints from optical filters.
Explains how to change the air filter on the back of the instrument.
Lists steps for replacing the air filter.
Refers to the wash procedure for dispenser maintenance.
Details general specifications of the VICTOR Nivo reader, including technologies and ranges.
Lists general specifications like measurement technologies, direction, and mode.
Covers plate compatibility, wavelength ranges, temperature control, and filters.
Provides physical dimensions and weight for the VICTOR Nivo and optional modules.
Details the available instrument models and their included technologies.
Lists performance metrics like ABS OD accuracy and precision.
Details detection limits and dynamic ranges for various measurement technologies.
Lists specifications for the optional dispenser module.
Provides specifications for the Alpha Laser component.
Outlines the electrical requirements for the system components.
Lists IT specifications like data storage and supported web browsers.
Details the specifications and functionality of the optional test plate.
Provides general specifications for the optional stacker module.
Provides general specifications for the optional stacker module.
Lists specifications for the stacker's barcode scanner.
Details the timing for various stacker operations like preparation and handling.
Specifies compatibility requirements for plates and lids with the reader and stacker.
Specifies general plate types and dimensions compatible with the reader.
Lists compatibility requirements for plates and lids with the stacker module.
To Next Page
