Need help?Do you have a question about the PerkinElmer SPECTRUM TWO N and is the answer not in the manual?
General| Type | FTIR Spectrometer |
|---|---|
| Resolution | 0.5 cm-1 |
| Interface | USB |
| Software | Spectrum 10 |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Wavelength/Wavenumber Range | 8300 - 350 cm-1 |
| Detector | DTGS |
| Beamsplitter | KBr |
| Scan Speed | Up to 10 scans per second |
| Operating Temperature Range | 15 to 35°C |
| Operating Humidity Range | 20 to 80% non-condensing |
| Interferometer | Dynamically aligned interferometer |
Provides a summary of essential safety precautions for routine instrument use.
Covers general safety principles and considerations for the instrument.
Details power connection, grounding, and disconnection requirements for safe operation.
Specifies operating temperature and humidity limits to ensure instrument protection.
Guidelines for instrument placement to ensure adequate cooling and ventilation.
Lists and describes optional sampling accessories available for the instrument.
Step-by-step guide for safely removing the spectrometer from its shipping container.
Explains various methods for connecting the instrument to a PC, including USB, Ethernet, and wireless.
Guides the user through the software installation process and initial instrument setup.
Details how to properly connect the instrument to the mains power supply.
Provides instructions for connecting the instrument to a PC using the supplied USB cable.
Explains how to establish a wireless connection between the instrument and a PC.
Details the process of connecting the instrument to a PC via an Ethernet cable.
Guides the user through launching the Spectrum software and connecting to the instrument.
Instructions on how to collect spectra from samples using the software.
Describes how to perform and interpret quality checks for spectral data.
Guides on adjusting and saving instrument parameters for optimal performance.
Details how to run component checks to verify instrument functionality.
Covers system checks to ensure fit-for-purpose performance and instrument verification.
Guides on replacing the desiccant to maintain optimal humidity levels.
Step-by-step instructions for replacing the instrument's source element.
To Next Page