96 . Spectrum Two N User's Guide
Overview
This section covers the maintenance that can be carried out by a user.
It describes:
• Cleaning the spectrometer
• Replacing the desiccant
• Purging the sample area
• Purging the instrument optics
• Replacing the sample compartment windows
• Replacing the source
• Replacing the main board air filter.
NOTE: You
must
use the appropriate Replacement Wizard in Spectrum, Spectrum ES or
AssureID software to replace the source, desiccant or sample compartment windows,
as described in this section. During the maintenance procedure, the internal
temperature of the instrument is maintained to prevent the ingress and condensation
of water vapor, which could damage the optics.
To Next Page
Loading...
Need help?
General
