14 . Spectrum Two N User's Guide
General Safety
The Spectrum Two N FT-NIR spectrometers have been designed and tested in accordance
with PerkinElmer specifications and in accordance with the safety requirements of the
International Electrotechnical Commission (IEC).
CE (Conformity European) Marking – Safety and EMC
The instruments conform to IEC publication 61010-1 (“Safety requirements for electrical
equipment for measurement, control, and laboratory use”) and therefore meets the
requirements of EC low voltage directive 2014/35/EU and EN 61326-1 standard for emission
and immunity Electromagnetic Compatibility (EMC) directive 2014/30/EU.
Canadian Standards Association
The instruments conform to Canadian Standards Association CSA 61010-1 and Underwriters
Laboratories UL 61010-1.
Environmental Conditions
If the instrument is used in a manner not specified by the manufacturer, the protection
provided by the instrument may be impaired. Only use the instrument under the following
environmental conditions:
Temperature 4 °C to 45 °C
Relative Humidity 90% maximum (non-condensing)
WARNING
AVERTISSEMENT
If the equipment is used in a manner not specified herein the
protection provided by the equipment may be impaired.
Si l'équipement est utilisé d'une manière non spécifiée ici, la protection
fournie par l'équipement peut être altérée.
Electrical safety
• Connect the instrument power supply to a power outlet that includes a switch or other
means of disconnection from the electricity supply.
• Only plug the instrument power supply into a socket power outlet that is provided with
a protective earth connection.
• The instrument must be disconnected from all voltage sources before it is opened for
any adjustment, replacement, maintenance or repair, unless otherwise directed in the
maintenance procedures described in this manual, or in Spectrum, Spectrum ES or
AssureID software.
To Next Page
Loading...
Need help?
General
