Need help?Do you have a question about the PerkinElmer TGA 8000 and is the answer not in the manual?
General| Temperature Range | Ambient to 1200 °C |
|---|---|
| Heating Rate | 0.1 to 100 °C/min |
| Atmosphere Control | Yes |
| Balance Capacity | 1 g |
| Interface | USB, Ethernet |
| Balance Sensitivity | 0.1 µg |
| Gas Flow Control | Mass flow control |
| Atmosphere | Inert, oxidizing, reducing |
| Sample Pan Type | Platinum, Ceramic |
| Sample Capacity | up to 1 gram |
Lists TGA 8000 safety precautions and technical specifications.
Covers warnings and procedures for handling hazardous chemicals.
Details the process of installing system purge and sample gases.
Step-by-step guide for installing the furnace hangdown wire and tare weight.
Steps to perform a weight calibration for accurate mass measurements.
Guide to calibrating the TGA 8000 for accurate temperature readings.
Procedure to optimize the balance for temperature-induced drift.
Steps to optimize the baseline drift for accurate measurements.
Essential safety guidelines for operating the TGA 8000 autosampler.
Explains the automated operation and work cycle of the autosampler.
Covers sample preparation, pans, atmosphere, and loading for the autosampler.
To Next Page