EasyManua.ls Logo

Perkins 1204F-E44TA - Burn Prevention

Perkins 1204F-E44TA
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use exhaust ventilation on permanent machining
jobs.
Wear an approved respirator if there is no other
way to control the dust.
Comply with applicable rules and regulations for
the work place. In the United States, use
Occupational Safety and Health Administration
(OSHA) requirements. These OSHA requirements
can be found in “29 CFR 1910.1001”.
Obey environmental regulations for the disposal of
asbestos.
Stay away from areas that might have asbestos
particles in the air.
Dispose of Waste Properly
Illustration 10 g00706404
Improperly disposing of waste can threaten the
environment. Potentially harmful fluids should be
disposed of according to local regulations.
Always use leakproof containers when you drain
fluids. Do not pour waste onto the ground, down a
drain, or into any source of water.
Diesel Exhaust Fluid
DEF is an aqueous solution of urea which can re-
lease ammonia vapors. Always wear the appro-
priate Personal Protective Equipment (PPE) that
is noted on a material safety data sheet (MSDS)
for Diesel Exhaust Fluid (DEF).
Do not inhale ammonia vapor or mist
Do not eat, drink, or smoke in presence of DEF
Avoid DEF contact with eyes, skin, and
clothing
Wash thoroughly after handling DEF
Always follow the directions for first aid that are
noted on a material safety data sheet (MSDS) for
Diesel Exhaust Fluid (DEF).
DEF is not expected to produce significant adverse
health effects when the recommended instructions
for use are followed.
Draining DEF must be carried out in a well
ventilated area.
Do not allow the DEF to be spilled onto hot
surfaces.
i07277507
Burn Prevention
Do not touch any part of an operating engine system.
The engine, the exhaust, and the engine
aftertreatment system can exceed 650° C (1202° F)
under normal operating conditions.
Allow the engine system to cool before any
maintenance is performed. Relieve all pressure in the
air system, hydraulic system, lubrication system, fuel
system, and the cooling system before the related
items are disconnected.
Contact with high pressure fuel may cause fluid
penetration and burn hazards. High pressure fuel
spray may cause a fire hazard. Failure to follow
these inspection, maintenance and service in-
structions may cause personal injury or death.
SEBU9063-07
13
Safety Section
Burn Prevention

Table of Contents

Other manuals for Perkins 1204F-E44TA

Related product manuals