(Table 13, contd)
Delayed Engine Shutdown Enable Status
Delayed Engine Shutdown Maximum Time
High Soot Load Aftertreatment Protection Enable Status
Air Shutoff
Throttle Lock Feature Installation Status
PTO Mode
Throttle Lock Engine Set Speed #1
Throttle Lock Engine Set Speed #2
Throttle Lock Increment Speed Ramp Rate
Throttle Lock Decrement Speed Ramp Rate
Throttle Lock Engine Set Speed Increment
Throttle Lock Engine Set Speed Decrement
Monitoring Mode Shutdowns
Monitoring Mode Derates
Limp Home Desired Engine Speed
Engine Acceleration Rate
Engine Speed Decelerating Ramp Rate
Intermediate Engine Speed
Fan
Engine Fan Control
Engine Fan Type Configuration
Engine Cooling Fan Temperature Error Increasing Hysteresis
Engine Cooling Fan Temperature Error Decreasing Hysteresis
Engine Cooling Fan Current Ramp Rate
Engine Cooling Fan Speed
Top Engine Fan Speed
Minimum Desired Engine Cooling Fan Speed
Engine Cooling Fan Solenoid Minimum Current
Engine Cooling Fan Solenoid Maximum Current
Engine cooling Fan solenoid Dither Frequency
Engine Cooling Fan Solenoid Dither Amplitude
Engine Cooling Fan Pulley Ratio
Engine Cooling Fan Speed (Proportional) Gain Percentage
Engine Cooling Fan Speed (Integral) Stability Percentage
Fan Temperatures
(continued)
66
SEBU9063-07
Operation Section
Configuration Parameters
To Next Page
Loading...
