Universal Warning (1)
Illustration 2 g01370904
One safety message universal warning label (1) is on
the left side of the valve mechanism cover. One
safety message universal warning label (1) is on the
right side of the valve mechanism cover.
Do not operate or work on this equipment unless
you have read and understand the instructions
and warnings in the Operation and Maintenance
Manuals. Failure to follow the instructions or
heed the warnings could result in serious injury
or death.
Hand High Pressure (2)
Illustration 3 g06247774
One safety message for high pressure (2) is on the
fuel rail.
i08390542
Additional Messages
There are several specific messages on this engine.
The exact location of the messages and the
description of the information are reviewed in this
section. Become familiar with all messages.
Make sure that all the messages are legible. Clean
the messages or replace the messages if the
messages are not legible. Replace the illustrations if
the illustrations are not legible. When cleaning the
messages, use a cloth, water, and soap. Do not use
solvent, gasoline, or other harsh chemicals to clean
the messages. Solvents, gasoline, or harsh
chemicals could loosen the adhesive that secures the
messages. Loose adhesive will allow the messages
to fall.
Replace any message that is damaged, or missing. If
a message is attached to a part that is replaced,
install a message on the replacement part.
Replacement labels may be obtained from Perkins
distributors.
M0087475-06
7
Safety Section
Additional Messages
To Next Page
Loading...
