Need help?Do you have a question about the Perkins 4006-23TAG3A and is the answer not in the manual?
General| Engine Model | 4006-23TAG3A |
|---|---|
| Compression Ratio | 13.6:1 |
| Cooling System | Water-cooled |
| Lubrication System | Wet sump |
| Governing type | Electronic |
| Displacement | 22.9 litres (1400 cubic inches) |
| Bore | 160 mm |
| Stroke | 190 mm |
| Aspiration | Turbocharged and aftercooled |
| Emissions Compliance | EU Stage IIIA |
Overview of the Perkins 4000 Series engine user's handbook.
Essential safety guidelines for operating and maintaining the engine.
Information on handling Viton seals and precautions for burnt material.
Guidance on proper engine maintenance for optimal performance and longevity.
Details on different levels of preservation for engines during storage and transit.
List of recommended Perkins POWERPART products for engine service.
Explanation of how to identify engine models and their serial numbers.
Technical specifications and data for the 4000 Series engine.
Diagrams identifying key components on the right and left sides of the engine.
Steps and factors affecting engine starting, including initial start procedures.
Detailed procedure for priming the engine's fuel system.
Steps for priming the engine's lubricating oil system before starting.
Guidelines for starting the engine under normal operating conditions.
Procedures for safely stopping the engine, including warm-up.
Precautions and recommendations for operating the engine at light loads.
Information on maintenance intervals based on operating hours or time.
A comprehensive schedule of maintenance operations and their frequency.
Step-by-step instructions for draining the engine's cooling system.
Procedure for correctly filling the engine's cooling system with coolant.
Instructions for replacing the engine's air filter elements.
Procedure for draining water and sediment from the fuel filter.
Method for checking and adjusting the alternator belt tension.
Method for checking and adjusting the fan belt tension.
Steps for changing the engine's lubricating oil.
Procedure for replacing the engine's lubricating oil filters.
Instructions for replacing the main fuel filter canisters.
Procedure for adjusting bridge pieces and setting valve clearances.
Requirements for diesel fuel quality, including cleanliness and sulfur content.
Guidelines for selecting and using appropriate lubricating oil for the engine.
Details on approved coolant mixtures, water quality, and maintenance.
Overview of fault diagnosis and the use of electronic service tools.
Diagram showing connections for diagnostic service tools to the engine governor.
Table listing common engine problems and their potential causes.
A comprehensive list of numbered possible causes for engine issues.
To Next Page
