(Table 3, contd)
Table for Warning Indicators
Warning Indicator
Shutdown
Indicator Indicator State
Description of the
Indication
Engine Status Operator Action
Level 3
Flashing ON Level 3 Engine condition is
abnormal.
The engine will auto-
matically shutdown.
If shutdown is not en-
abled, the engine can
operate but may
course damage .
Stop engine immediately.
Investigate the fault.
i07397434
Overspeed
The overspeed threshold is the Revolution Per
Minute (RPM) listed below for the engines covered
by this Operation and Maintenance Manual (OMM).
• 403J-E17T 3700 RPM
• 404J-E22T 3700 RPM
• 404J-E22TA 3700 RPM
i07399976
Sensors and Electrical
Components
The illustration within the section shows the typical
locations of the sensors and other electrical
components on the Industrial engine. Specific
engines may appear different due to the application.
M0094137-02 43
Operation Section
Overspeed
To Next Page
Loading...
